Bloomfield Hills's Most Trusted Heating and AC Company

Today, I worked on a Bosch mini split system installation. The job was challenging, but we were able to complete it successfully. The system was installed in a large home, and the installation process involved running electrical wires, installing the indoor unit, and connecting the outdoor unit. We also had to ensure that the system was tested to ensure it was operating at peak efficiency.

Today, we had a Daikin Mini Split Install. The job was a challenging one, but nothing we couldn't handle. Overall, the job was a success, and the customer was very happy with the results.

Furnace Tune-up

I was called to a home to perform a tune-up on a furnace. The furnace was not working properly, and the homeowner was concerned about the cost of repairs. I arrived at the home and inspected the furnace. I found that the furnace was not producing heat, and the pilot light was not lit. I checked the gas line and found that it was not connected properly. I repaired the gas line and lit the pilot light. I then tested the furnace to ensure that it was working properly. The furnace was working properly, and the homeowner was happy with the service.

I was called to replace a capacitor on a condenser unit. The condenser unit was located on the roof of a commercial building. I used a ladder to access the unit and removed the old capacitor. I then installed the new capacitor and secured it in place. I tested the unit to ensure it was working properly and then cleaned up the work area.

Just completed a dual Daikin outdoor condenser install in west Bloomfield Michigan

I was called to a home to replace a furnace power switch. When I arrived, I found that the old switch was not working properly. I removed the old switch and installed a new one. I tested the switch to make sure it was working properly before leaving the job site.

I recently completed a job to maintain a residential air conditioning unit. The first step was to inspect the unit and identify any issues or potential problems. Next, I cleaned the condenser coil and evaporator coil to ensure optimal airflow and prevent dirt and debris from building up. I also checked and adjusted the thermostat to ensure it was set correctly and was communicating with the air conditioner. Finally, I tested the operation of the air conditioner and made any necessary repairs or adjustments to ensure it was working properly.

I recently completed a residential A/C tune-up for a client ., and I'm pleased to share the details of the job with you. As a highly skilled HVAC contractor, my goal was to ensure that the client's air conditioning system was operating at its peak efficiency and safety.During the tune-up, I thoroughly inspected and cleaned the entire system, including the condenser coil, evaporator coil, blower motor, and air filters. I also checked the refrigerant levels, electrical connections, and thermostat settings. By performing these essential maintenance tasks, I was able to optimize the system's performance, reduce energy consumption, and improve air quality in the client's home. The client was extremely satisfied with the results, and I was happy to provide them with a maintenance plan to keep their system running smoothly all year round.