Steam Boiler Maintenance

Cleaned out clogged condensate drain

Homeowner called, A/C had stopped cooling on the 4th of july! We were able to promptly add them to our schedule the next day and take care of their no cool air issue. Run capacitors were bad and needed a replacement. Unit is back up and running!

I recently completed a job replacing the blower motor on an American Standard Furnace. This job required me to remove the old blower motor and install a new one. I also had to connect the new motor to the furnace's wiring and test the new motor to ensure it was working properly. Finally, I cleaned up the area and made sure everything was in working order.

I recently completed a job replacing the blower motor on an A. American Standard Furnace. This job required me to remove the old blower motor and install a new one. I also had to connect the new motor to the furnace's wiring and test the new motor to ensure it was working properly. Finally, I cleaned up the area and made sure everything was in working order.

I recently completed a job replacing the blower motor on an A. American Standard Furnace. This job required me to remove the old blower motor and install a new one. I also had to connect the new motor to the furnace's wiring and test the new motor to ensure it was working properly. Finally, I cleaned up the area and made sure everything was in working order.

I recently completed a job replacing a dual capacitor on a Luxaire AC unit. As a highly skilled and experienced home service professional, I carefully removed the old capacitor from the unit and disconnected the wires from it. Then, I carefully installed the new capacitor and reconnected the wires to it. Finally, I tested the unit to ensure that the capacitor was functioning properly. This job required a high level of skill and expertise, and I am proud to have completed it successfully.

I recently completed a service call for a customer with a Goodman AC unit that was not cooling. Upon inspection, I found that the capacitor had failed, which was the likely cause of the issue. I replaced the capacitor with a new one and tested the unit to ensure it was working properly. The AC unit was restored to full functionality, and the customer was satisfied with the service.

I recently started up an AC system on a Bryant system. This involved checking and testing various components of the system, such as the compressor, condenser, evaporator, and thermostat, to ensure that they were working properly. I also adjusted the system's settings to match the customer's preferences, such as the temperature and airflow. Finally, I performed a system performance test to ensure that the AC was operating efficiently and safely.

I recently completed a job as an HVAC technician at a commercial building where I performed a maintenance inspection on a SlantFin Steam Boiler. The purpose of this inspection was to ensure that the boiler was operating safely and efficiently. I started by conducting a thorough visual inspection of the boiler, checking for any signs of wear and tear, damage, or malfunctions. I then tested all the safety features, including the pressure relief valves, temperature and pressure gauges, and combustion air intake. After completing these inspections, I made any necessary adjustments to ensure that the boiler was operating correctly. Finally, I provided the building owner with a detailed report of my findings and recommendations for future maintenance.

I recently completed a job as an HVAC technician at a commercial building where I performed a maintenance inspection on a SlantFin Steam Boiler. The purpose of this inspection was to ensure that the boiler was operating safely and efficiently. I started by conducting a thorough visual inspection of the boiler, checking for any signs of wear and tear, damage, or malfunctions. I then tested all the safety features, including the pressure relief valves, temperature and pressure gauges, and combustion air intake. After completing these inspections, I made any necessary adjustments to ensure that the boiler was operating correctly. Finally, I provided the building owner with a detailed report of my findings and recommendations for future maintenance.

I recently completed a service maintenance job on a Goodman air handler with a Bryant AC. The air handler is an essential component of the HVAC system, responsible for cooling the air in the home. During the service maintenance, I thoroughly inspected the air handler, checking for any signs of wear and tear or potential issues. I replaced the air filter, which is an important part of the system responsible for trapping dust and allergens, ensuring optimal air quality. I also checked the electrical connections and made any necessary repairs to ensure safe and efficient operation. Additionally, I lubricated moving parts to reduce friction and prevent wear and tear. By performing regular service maintenance, I helped to prolong the lifespan of the air handler and ensure optimal performance of the entire HVAC system.

I recently completed an HVAC service performed city certification inspection on a Bryant furnace. As part of my duties, I ensured that the furnace was operating safely and efficiently according to local regulations. I also checked the combustion air intake, flue gas venting, and heat exchanger for any signs of wear or damage. To obtain the city certification, I thoroughly documented my findings and completed all necessary paperwork. This inspection is essential to ensure that the furnace meets safety standards and regulations, protecting the health and well-being of the residents.

Service Repair on a Goodman Condenser coil with a Unico airhandler. I found the unit to be empty of refrigerant. I performed a leak search in the cooling module of the Unico system. I gave a quote to replace the cooling module. The customer is satisfied and is going to schedule the repair

A/C Maintenance on 3 amana systems. Checked the temperature difference, blower motor Amp draw, compressor motor Amp draw, condenser fan motor Amp draw, refrigerant levels, dual run capacitor, and line and load voltage to the contactor. I also cleaned the condenser coil.

AC service repair on a Bryant system. The customer had reported that their system was not producing cool air. After performing a thorough inspection, I determined that the evaporator coil needed to be replaced. I removed the old coil and installed a new one, making sure to follow all manufacturer instructions for proper installation. The new coil was tested to ensure it was working correctly, and the system was tested again to ensure it was operating at optimal efficiency. The customer was satisfied with the repair and thanked me for my professional service!