In the Warren area, McCarver Mechanical Heating & Cooling is well known for providing exceptional furnace repair, installation, and service. The people we send out to serve you are also top notch, something you'll see in their reviews below. Everyone you deal with at our company has the goal of making sure your experience with us will be so good you'll call us every time you need help. You can feel confident working with McCarver Mechanical Heating & Cooling because we stand behind our work and comply with all local codes. This is why, as you can see by the map and reviews below, we are rated so highly for Furnace, Heat Pump, and AC Repair in Warren, MI. Call us today at (586) 489-3884!
I was called to a home to perform a tune-up on a boiler. The boiler was not producing enough heat, and the homeowner was concerned that it might need to be replaced. I inspected the boiler and found that the pilot light was out. I relit the pilot light and adjusted the gas pressure. The boiler was now producing enough heat to meet the homeowner's needs.
Today, we were in Warren, Michigan. We had a Luxaire Furnace and Air Conditioner install. Everything turned out great!
Cleaned out clogged condensate drain
I am a skilled professional that works for a McCarver Mechanical Heating & Cooling company. I was recently assigned to replace fuses on a disconnect for a condenser. The condenser is a component of a heating and cooling system that is used to remove heat from a building. To replace the fuses on the disconnect, I first turned off the power to the condenser. Then, I removed the cover from the disconnect and located the fuses. I carefully removed the old fuses and replaced them with new ones. I then turned on the power to the condenser and tested the new fuses to ensure they were working properly. It was a challenging job, but I was able to complete it successfully. I am proud of the work I did and the knowledge I gained from the experience.
I was called to a home to fix a leak in the air conditioning system. Upon arrival, I found that the leak was coming from a small hole in the refrigerant line. I used a sealant to repair the hole and then filled the system with R-410A refrigerant. After completing the repair, I tested the system to ensure that it was working properly. The customer was very satisfied with the work and thanked me for my help.
I was working as an HVAC contractor when I received a call from a customer who was experiencing problems with their air conditioner. Upon arrival, I found that the condensate drain on the evaporator coil was clogged. I used a plumbing snake to clear the drain, and then I flushed the system with a solution to remove any debris or buildup. Afterward, I tested the system to ensure that it was working properly. The customer was very satisfied with the service, and I was able to resolve the issue quickly and efficiently.
Just installed a high efficiency furnace and air conditioner in the Warren area
Today we are installing a new high efficiency Luxaire heating and cooling system
Recently, I was called to a customer's home to inspect and repair their air-conditioning system. Upon arrival, I found that the system was not functioning properly. I conducted a thorough inspection and discovered a faulty dual capacitor that was causing the issue. I replaced the capacitor and tested the system to ensure it was working correctly. The customer was thrilled with the results and expressed their gratitude for my prompt and efficient service.
I was hired to perform a residential air conditioning tune-up. The client had noticed that their air conditioner was not cooling their home as efficiently as it should be. I arrived at the client's home and performed a thorough inspection of the air conditioning system. I checked the refrigerant levels, cleaned the air filters, and tested the electrical components. I also checked the ductwork for any leaks or damage. After the tune-up, the client's air conditioner was running more efficiently and cooling their home more effectively. The client was very satisfied with the service and expressed that they would recommend me to their friends and family.
Excellent experience! Sean arrived to my home as scheduled and was very knowledgeable. He kept me informed of every step in the process. When he identified the problem Sean was upfront about the cost to repair and ensured I was ok with him proceeding to fix the issue. Very polite and professional. Sean thank you for your service!
I recently completed a service call for a customer with a Goodman AC unit that was not cooling. Upon inspection, I found that the capacitor had failed, which was the likely cause of the issue. I replaced the capacitor with a new one and tested the unit to ensure it was working properly. The AC unit was restored to full functionality, and the customer was satisfied with the service.
Hot water tank replacement
Building custom ductwork
Good job, affordable prices!
Impressive group of people installed our HVAC system. Courteous, clean, and professional.
I recently completed a Bryant Furnace and Air Conditioning Install job for a customer in Grosse Pointe. The customer was experiencing issues with their old furnace, so I installed a new Bryant furnace and air conditioner to ensure efficient and reliable heating and cooling in their home. The new Bryant furnace is equipped with advanced features such as a variable-speed blower motor, which allows for precise temperature control and energy savings. The air conditioner features a high-efficiency compressor and a two-stage scroll motor, which provide optimal cooling performance and energy efficiency. The installation process involved careful planning and precise execution to ensure that the new equipment was installed correctly and safely. To ensure optimal performance, I also performed a system tune-up and adjusted the airflow and thermostat settings to meet the customer's needs.
Chris is great!
I just finished a service call for a Lennox system. Upon arrival, I checked the thermostat and found that it was set to heat. I then checked the system and found that the fan was running, but the compressor was not. I checked the breaker and found that it was tripped. I reset the breaker and tested the system, which worked fine.