AC and Furnace Service in Warren

Installing a new Bradford White hot water heater

I performed a thorough inspection on a furnace to identify any potential issues. I checked the electrical connections, inspected the burner assembly, and tested the gas pressure. I also cleaned the burners and inspected the heat exchanger for any signs of corrosion or damage. After the inspection, I provided a detailed report to the customer, including recommendations for any necessary repairs or maintenance.

I was hired to perform a tune-up on a furnace. The furnace was not producing heat properly, so I diagnosed the issue and replaced the faulty parts. I also cleaned the furnace and checked the safety features to ensure it was working properly.

I was called to a home to relight a pilot on a furnace. When I arrived, I found that the pilot light had gone out. I checked the gas line and found that it was not blocked. I then checked the thermostat and found that it was working properly. I then relit the pilot light and tested the furnace to ensure that it was working properly. I then cleaned up the area and left the home.

I was hired to perform maintenance on a residential steam boiler. The boiler was not producing steam, so I checked the pressure relief valve and found that it was not working properly. I replaced the valve and tested the boiler to ensure it was working correctly.

Installed a new high efficiency State hot water heater.

I recently completed a luxaire furnace and a/c installation in Sterling Heights. The job went smoothly from start to finish. The customer was very pleased with the results and expressed gratitude for the professional and efficient service provided by our team.

Furnace tune up

I was called to a home to perform a tune-up on a boiler. The boiler was not producing enough heat, and the homeowner was concerned that it might need to be replaced. I inspected the boiler and found that the pilot light was out. I relit the pilot light and adjusted the gas pressure. The boiler was now producing enough heat to meet the homeowner's needs.

Today, we were in Warren, Michigan. We had a Luxaire Furnace and Air Conditioner install. Everything turned out great!

Installing a new high efficiency Luxaire heating and cooling system

Cleaned out clogged condensate drain

Furnace and AC install

I am a skilled professional that works for a McCarver Mechanical Heating & Cooling company. I was recently assigned to replace fuses on a disconnect for a condenser. The condenser is a component of a heating and cooling system that is used to remove heat from a building. To replace the fuses on the disconnect, I first turned off the power to the condenser. Then, I removed the cover from the disconnect and located the fuses. I carefully removed the old fuses and replaced them with new ones. I then turned on the power to the condenser and tested the new fuses to ensure they were working properly. It was a challenging job, but I was able to complete it successfully. I am proud of the work I did and the knowledge I gained from the experience.

Just finished a Hot Water Tank Replacement in Warren, Mi

I was called to a home to fix a leak in the air conditioning system. Upon arrival, I found that the leak was coming from a small hole in the refrigerant line. I used a sealant to repair the hole and then filled the system with R-410A refrigerant. After completing the repair, I tested the system to ensure that it was working properly. The customer was very satisfied with the work and thanked me for my help.

Installing a new high efficiency Luxaire heating and cooling system

I was working as an HVAC contractor when I received a call from a customer who was experiencing problems with their air conditioner. Upon arrival, I found that the condensate drain on the evaporator coil was clogged. I used a plumbing snake to clear the drain, and then I flushed the system with a solution to remove any debris or buildup. Afterward, I tested the system to ensure that it was working properly. The customer was very satisfied with the service, and I was able to resolve the issue quickly and efficiently.

We just installed a new high efficiency Luxaire heating and cooling system

We just installed a new high efficiency Luxaire heating and cooling system

Replaced a Furnace & Air Conditioner in Warren, Mi.

Just installed a high efficiency furnace and air conditioner in the Warren area

Removed and replaced Air Conditioner Unit in Warren, Mi.

Today we are installing a new high efficiency Luxaire heating and cooling system

Just finished an evaporator coil replacement in the Birmingham area

Recently, I was called to a customer's home to inspect and repair their air-conditioning system. Upon arrival, I found that the system was not functioning properly. I conducted a thorough inspection and discovered a faulty dual capacitor that was causing the issue. I replaced the capacitor and tested the system to ensure it was working correctly. The customer was thrilled with the results and expressed their gratitude for my prompt and efficient service.

I was hired to perform a residential air conditioning tune-up. The client had noticed that their air conditioner was not cooling their home as efficiently as it should be. I arrived at the client's home and performed a thorough inspection of the air conditioning system. I checked the refrigerant levels, cleaned the air filters, and tested the electrical components. I also checked the ductwork for any leaks or damage. After the tune-up, the client's air conditioner was running more efficiently and cooling their home more effectively. The client was very satisfied with the service and expressed that they would recommend me to their friends and family.

I recently completed a service call for a customer with a Goodman AC unit that was not cooling. Upon inspection, I found that the capacitor had failed, which was the likely cause of the issue. I replaced the capacitor with a new one and tested the unit to ensure it was working properly. The AC unit was restored to full functionality, and the customer was satisfied with the service.

Hot water tank replacement

Building custom ductwork

I recently completed a Bryant Furnace and Air Conditioning Install job for a customer in Grosse Pointe. The customer was experiencing issues with their old furnace, so I installed a new Bryant furnace and air conditioner to ensure efficient and reliable heating and cooling in their home. The new Bryant furnace is equipped with advanced features such as a variable-speed blower motor, which allows for precise temperature control and energy savings. The air conditioner features a high-efficiency compressor and a two-stage scroll motor, which provide optimal cooling performance and energy efficiency. The installation process involved careful planning and precise execution to ensure that the new equipment was installed correctly and safely. To ensure optimal performance, I also performed a system tune-up and adjusted the airflow and thermostat settings to meet the customer's needs.

I just finished a service call for a Lennox system. Upon arrival, I checked the thermostat and found that it was set to heat. I then checked the system and found that the fan was running, but the compressor was not. I checked the breaker and found that it was tripped. I reset the breaker and tested the system, which worked fine.